Precise C edited

GNSS Reference Receiver

PRECISE C

Redefining CORS with Unmatched Precision and Reliability.

Precise C 2

PRECISE C

PRECISE C is a lightweight split GNSS receiver designed for the safety monitoring industry, featuring miniaturisation, low power consumption, low cost, high update rate, Gigabit network port, high satellite search quality, etc. Used with a small 3D choke antenna, it can be used as a reference and monitoring station in harsh monitoring scenarios, and is widely used in the fields of bridge monitoring, dams in reservoirs, and other precision structures monitoring.

Satellite.M10.2k

Full Constellation Tracking

Support main stream GNSS satellite positioning system, support the new frequency of Bei Dou 3, signal stability and reliability.

White Sound Wave Icon.H02.2k

High Frequency Monitoring

20Hz high frequency monitoring data output as standard, up to 50Hz supported (authorisation required).

Jet Engine Cross Section.H03.2k

Powerful Performance

The mainframe uses a stable Linux operating system and is equipped with a Cortex-A8 processor with strong processing power.

People Network Icon.H03.2k

Front-end Resolution

Supports distributed front-end solving to reduce the burden on the server and improve the number of server devices accessed.

Box.H03.2k

Simple Appearance

The whole machine is lightweight and compact, combined with a small 3D choke antenna for use as a lightweight reference station.

Infrared Remote Control.F03.2k

Remote Control

Device monitoring, setup and upgrades are achieved through the cloud, reducing the professional requirements of on-site installers.

Detail Specification

SATELLITE PERFORMANCE

Channels800
GPSL1C/A, L1C, L1P, L2C, L2P, L5
BDSB1l, B21, B3I, B1C, B2a, B2b, АСЕВОС
GLONASSG1, G2, G3
GALILEOE1, E5a, E5b, ALTBOC, E6
QZSSL1C/A, L1C, L2C, L5, LEX
SBAS
L-Band
Refresh Rate20Hz

ACCURACY

StaticH: 2.5mm+0.5ppm
V: 5mm+0.5ppm
Network PPKH: 8mm±0.5ppm (RMS)
V: 15mm±0.5ppm (RMS)

Time to First Fix (TTFF)

Cold Start60s
Hot Start10s
Recapture Time<1s

Electrical Parameters

Input Voltage8~36V
with reverse connection and surge protection

System Configuration

Operating SystemLinux+A8
Internal Storage32G on board, no TF card slot
BluetoothBT5.0+EDR Backwards Compatible/BLE
WIFI802.11 b/g/n/ac

Data Interfaces

GNSS1xTNC female, external GNSS antenna
ETH1xRJ45, 10/100/1000 Mbps
COM1xLemo-0 female, 9 pin, DB9
PWR1xLemo-0 female, 2 pin, Power Input

Interaction

Satellite lightSlow green flash indicates normal operation
Fast flashing green indicates no satellite receiving
Storage LightFlashing green indicates storage in progress
(synchronised with recording rate)
Transmission lightFlashing green indicates transmission in progress
(synchronised with the transmitted data rate)
Power lightConstant green indicates normal

Environmental Performance

Working Temperature-30°C ~ +65°C
Storage Temperature-40°C ~ +80°C
Waterproof and DustproofIP67
DropResistant to 2m free fall
(concrete hard floor)
Humidity95 per cent non-condensing

PHYSICAL

Dimension131mm * 36.5mm * 97mm
Weight435g

What our customers are saying about us

profile square

Anil Kumar

India

“PRECISE C ensures accuracy and reliability for our agricultural mapping needs.”

profile square

Maria González

Spain

“Its consistent precision in harsh environments is unparalleled.”

profile square

Alexei Petrov

Brazil

“PRECISE C delivers flawless positioning for our large-scale infrastructure projects.”

profile square

John Miller

United States

“PRECISE C has revolutionized our surveying accuracy—reliable, efficient, and easy to deploy.”

Miniaturised Anti-Multipath Antenna

PRECISE AN2

This antenna is a full-band measurement antenna covering GPS L1/L2, GLONASS L1/L2, BDS B1/B2/B3, Galileo E5. It meets the needs of multi-system compatibility of measurement equipment and extremely high precision micro-deformation measurement: it is mainly used in some occasions where there is a very high requirement for measurement accuracy and the surrounding environment has a multipath influence, such as seismic prediction, High-precision differential reference stations and other demanding applications.

3

Reference Station Antenna

PRECISE AN4

An4 is a 4-system full-band 3D choke antenna covering GPS, GLONASS, BDS, and GALILEO, which meets the current demand for high-precision and multi-system compatibility of measurement equipment. It can be widely used in geodetic mapping, oceanographic surveying, waterway surveying, dredging surveying, seismic monitoring, bridge deformation monitoring, landslide monitoring, terminal container operation and other high-precision occasions.

An4

Take the Leap to Superior Accuracy

Get Your PRECISE Today!

Unlock precision and efficiency with PRECISE. Order now and take your projects to the next level.
Don’t wait—transform your work today!